Assembly Instructions

17EA1203-----23
17D03A040401-YX
17KAA0201----Y4
17KAB1101----Y4
HEX. KEY WRENCH 6MM
NUT WRENCH 10 &13MM
2
4
7
8
9
10
11
12
13
PAGE 1 OF 2
COURTYARD CREATIONS INC.
1
1
17KAA0101----Y4
HEX. KEY WRENCH 4MM
1
17C03A0816041YX
4
1
2
3
4
5
6
1
1
1
1
1
RTS873T-CS03-1
RTS873T-CS02-1
RTS873T-CS04-1
RTS873T-CS01-2
RTS873T-CS01-3
PART
NO.
MATERIAL CODE PART Q’TY
17FA08060601-YX
17C40A0710001YX
8
8
WASHER
BOLT M6*30
BOLT M8*45
BACK ASSEMBLY
LEFT ARM
RIGHT ARM
SEAT ASSEMBLY
BASE ASSEMBLY
E-2
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely
assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC No. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
!
!
!
!
!
WASHER d8.5*D17*1.6
JAM NUT M8*1.25
FIGURE 1
3
4
1
6
2
L
R
30
#6 BOLT M6*30
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Place the right arm (#4) onto a non-abrasive surface,
such as a carpet. Fasten the back assembly (#1) and
seat assembly (2) to the arms (#3 and #4) by using
bolts (#6). See Figure 1.
Note:
The labels marked “L” and “R” on the arms (#3 and #4)
should coincide with Figure 1 to ensure proper
assembly.
ASSEMBLY INSTRUCTIONS
PARTS LIST
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE INTENDED FOR RESIDENTIAL USE ONLY.
SKU#2725099 / MODEL#18S4110T（RTS873T）