Assembly Instructions
RIVERDALE
HIGH BISTRO TABLE
IMPORTANT: PLEASE READ COMPLETE INSTRUCTION SHEET PRIOR TO ASSEMBLY!
Identify all parts packed in carton against the parts list. Remove all protective materials, place
parts on a nonabrasive surface to avoid scratching. If any parts are missing or damaged, DO
NOT attempt to assemble. Please contact our customer service center (Monday-Friday 8:30
a.m.-4:30 p.m. CST) at 1-800-426-2950 or e-mail: cs@patiohelpdesk.com.
Step 1
Attached the leg connector bracket (D) to the table legs (C) using eight bolts (F), eight bolts (G)
and metal washers (E). Do not tighten the bolts until assembly is complete.
Step 2
Place the table rim (A) upside down on a flat, soft surface. Attach the assembled frame to the
table rim (A) using four bolts (F) and metal washers (E). Tighten all the bolts with the Allen
wrench (H). IMPORTANT NOTE: Each bolt should be tightened a few revolutions at a time,
alternating between bolts in a cross corner (X) pattern to ensure your table is level.
Step 3
Carefully turn the table into the upright position. Place the glass (B) in the table rim (A). Your
table is now ready for use.