Assembly Instructions

A
TABLE RIM
1 AA
HEX BOLT
M6*20L
12
B
TABLE TOP
1 BB
METAL
WASHER
12
C
LEG
CONNECTO
R BRACKET
1 CC
PLASTIC
BOLT CAP
12
D
LEG
4 DD
HEX
WRENCH
1
● Cover furniture with outdoor furniture covers when not in use.
● For safety reasons, do not sit or stand on the table.
Step 3
Turn the table into the upright position and put the table top on it. Your table is ready for use.
IMPORTANT: To avoid damage to your table:
● In storing patio furniture, do not stack anything on glass, stone or marble table tops.
● Before storing, drain all water that may have accumulated in or around the frames.
● If not drained properly, water can cause freeze damage.
Avery Meadow Chat Table
272-5371
IMPORTANT: PLEASE READ COMPLETE INSTRUCTION SHEET PRIOR TO ASSEMBLY!
Identify all parts packed in carton against the parts list. Remove all protective materials, place parts on a nonabrasive surface
to avoid scratching. If any parts are missing or damaged, DO NOT attempt to assemble. Please contact our customer service
center (Monday-Friday 8:30 a.m.-4:30 p.m. CST) at 1-800-426-2950 or e-mail: [e-mail].
PARTS LIST
Step 1
Attach the leg (D) to the table rim (A) using eight bolts (AA), eight washer (BB). Do not tighten the bolts until assembly is
complete.
Step 2
A. Attach the leg connector bracket (C) to the finished frame using four bolts (AA) and eight washers (BB).
B. Tighten all bolts, then attach all the bolt caps (CC).