Assembly Instructions

Avery Meadow Chat Rocker
272-5370
A
RIGHT ARM
1 CC
PLASTIC BOLT
CAP M6
8
B
LEFT ARM
1 DD
HEX BOLT
M8*45L
4
C
BACK
1 EE
METAL WASHER
M8
8
D
SEAT
1 FF
SPRING
WASHER
M8
4
E
BASE
1 GG
NUT M8
4
F
t-ROCK
1 HH
RECTANGULAR
STEEL PLATE
4
G
SEAT CUSHION
1 II
PLASTIC BOLT
CAP M8
4
H
BACK
CUSHION
1 JJ
PLASTIC
NUTCAP M8
4
AA
HEX BOLT
M8*40L
8 KK
HEX WRENCH
2
BB
METAL
WASHER
M6
8
IMPORTANT: PLEASE READ COMPLETE INSTRUCTION SHEET PRIOR TO ASSEMBLY!
Identify all parts packed in carton against the parts list. Remove all protective materials, place parts on a
nonabrasive surface to avoid scratching. If any parts are missing or damaged, DO NOT attempt to assemble. Please
contact our customer service center (Monday-Friday 8:30 a.m.-4:30 p.m. CST) at 1-800-426-2950 or e-mail:
[e-mail].
PARTS LIST
Step 1:
Attached the right arm (A) and left arm (B) using four bolts (AA), four washer (BB), and four bolt cap (CC). Do not tighten the bolts until
assembly is complete.
Step 2
Attach the finished frame to the seat (D) using four bolts (AA), four washer (BB), and four bolt cap (CC). Do not tighten the bolts until
assembly is complete.
IMPORTANT:
● Before storing, drain all water that may have accumulated in or around the frames.
● If not drained properly, water can cause freeze damage.
● Cover furniture with outdoor furniture covers when not in use.
Step 3
A. Attach the T-rock (C) to the finished frame using four bolts (DD) in the order of bolt (DD), metal washer (EE), rectangular steel plate
(HH), metal washer (EE), spring washer (FF), and nut (GG). NOTE: Bolts are inserted from underneath the seat through the crossbar and
into the T-rock.
B. Tighten all bolts (AA&DD) and nuts (GG) using hex wrench (KK). Cover all bolts and nuts with plastic bolt and nut caps (CC, II & JJ).