Assembly Instructions

ASSEMBLY INSTRUCTIONS
STEP ONE: ATTACH THE TABLE LEG (B) TO THE
TABLE TOP (A).
⚫ Make sure to place the table upside down on a non–
abrasive surface to avoid scratches.
⚫ Attach Table Legs (B) to the Table Top (A) with the
Washers (E) and the Hex Bolts (D). Do not put the
Caps (F) on the Hex Bolts (D) until the Hex Bolts(D)
fully tightened in step two.
⚫ Do not tighten the bolts completely in this step.
STEP TWO: SECURE CENTER CONNECTOR (C) TO
MIDDLE OF THE TABLE LEG (B)
⚫ Attach the Center Connector (C) to the Table Legs (B)
with the Washers (E) and the Hex Bolts (D).
⚫ Fully tighten all the Hex Bolts (D) by using the Socket
Wrench (G) once all the Hex Bolts (D) are in place.
⚫ Cover all the Hex Bolts (D) with the bolt Caps (F).
STEP THREE: WITH ASSISTANCE, TURN THE TABLE
UPRIGHT
⚫ Now your table is ready for use!
BACKYARD CREATIONS® MANUFACTURER‘S WARRANTY (Limited 1-Year Warranty)
This product is covered under the manufacturer’s one year limited warranty against defects in workmanship and materials. If your
product fails structurally during normal use within one year of purchase, the manufacturer will repair or replace the defective unit at no
charge. The warranty excludes furniture used for commercial purposes, furniture damaged by act of nature, abuse or lack of proper care
or corrosion or rusting of metal frame and hardware. Proof of purchase (dated register receipt) and in some cases photos of the product
are required for warranty claims. Maintain your outdoor furniture by using furniture covers and store away during extreme weather
conditions.
Made in China