Assembly Instructions

INSTRUCTION MANUAL: SKU # 272-0885 PORTER TABLE

CAUTION: Read all instructions before assembly. Failure to do so may result in faulty assembly and potential injury.

SPECIAL WARNINGS: Assemble on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item.

Note: Identify all parts in carton against the parts list. Remove all protective material carefully. To prevent scratching the

surfaces, do not use knife. If any parts are missing or damaged, contact Customer Service. DO NOT attempt to assemble.

CLEANING & CARE: Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.

CUSTOMER SERVICE: For questions, assistance or repair parts, please call toll free at: (877) 898-3958 (Mon-Fri, 9 AM -

5 PM, Excluding US Holidays) or email patioparts@gmail.com.

PARTS LIST

REF

PARTS NAME

IMAGE

QTY

TABLE TOP

TABLE LEG

CENTER CONNECTOR

M6 x 15mm HEX BOLT

M6 WASHER

M6 CAP

SOCKET WRENCH

For missing parts, please call toll free customer

service number for further assistance.

PAGE 1
INSTRUCTION MANUAL: SKU # 272-0885 PORTER TABLE CAUTION: Read all instructions before assembly. Failure to do so may result in faulty assembly and potential injury. SPECIAL WARNINGS: Assemble on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Note: Identify all parts in carton against the parts list. Remove all protective material carefully. To prevent scratching the surfaces, do not use knife. If any parts are missing or damaged, contact Customer Service.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP ONE: ATTACH THE TABLE LEG (B) TO THE TABLE TOP (A). ⚫ Make sure to place the table upside down on a non– abrasive surface to avoid scratches. ⚫ Attach Table Legs (B) to the Table Top (A) with the Washers (E) and the Hex Bolts (D). Do not put the Caps (F) on the Hex Bolts (D) until the Hex Bolts(D) fully tightened in step two. ⚫ Do not tighten the bolts completely in this step.