Assembly Instructions

STEP THREE: ATTACHING THE LEFT ARMREST
• Left Armrest (C) end hole cover the Decorative Tube
(D) end. Attach the Left Armrest (C) to the frame
assembled in step two by using M6*25mm Hex Bolts
(L) and M6 Washers (H).
• Do not tighten the bolts completely in this step.
STEP FOUR: ATTACHING THE SUPPORT TUBE
• Attach the Support Tube (E) to the armrests frame with
the M6*15mm Hex Bolts (J) and M6 Washers (H).
• Do not tighten the bolts completely in this step.
STEP FIVE: ATTACHING THE STEM BRACKET
• Attach the Stem Bracket (F) to the underside of chair
seat by using M6*15mm Hex Bolts (J) , M6 Washers
(H), and using M8*15mm Hex Bolts (K) and M8
Washers (I).
• Fully tighten all the bolts with the wrench (R) and
Socket Wrench (S) accordingly once all the bolts are in
place.
• Cover all the M6 Hex Bolts with the M6 Hex Bolt
Caps(O) and all the M8 Hex Bolts with the M8 Hex
Bolt Caps(O).