Assembly Instructions

ManualsBrandsBackyard Creations ManualsOutdoorsPorter Swivel Rocker Dining Patio Chair - 2 Pack

INSTRUCTION MANUAL: SKU # 272-0941 PORTER SWIVEL ROCKER

CAUTION: Read all instructions before assembly. Failure to do so may result in faulty assembly and potential injury.

SPECIAL WARNINGS: Assemble on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item.

Note: Identify all parts in carton and compare against the parts list. Remove all protective material carefully. To prevent

scratching the surfaces, do not use a knife. If any parts are missing or damaged, contact Customer Service. DO NOT attempt

to assemble.

CLEANING & CARE: Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.

CUSTOMER SERVICE: For questions, assistance or repair parts, please call toll free at: (877) 898-3958 (Mon-Fri, 9 AM

- 5 PM, Excluding US Holidays) or email patioparts@gmail.com.

PARTS LIST

REF.

PARTS NAME

IMAGE

QTY

SEAT AND BACK

RIGHT ARMREST

LEFT ARMREST

DECORATIVE TUBE

SUPPORT TUBE

STEM BRACKET

BASE

M6 WASHER

M8 WASHER

M6*15mm HEX BOLT

M8*15mm HEX BOLT

M6*25mm HEX BOLT

M6 HEX BOLT CAP

M8 HEX BOLT CAP

WRENCH

SOCKET WRENCH

For missing parts, please call toll free customer

service number for further assistance.

Summary of content (4 pages)

PAGE 1
INSTRUCTION MANUAL: SKU # 272-0941 PORTER SWIVEL ROCKER CAUTION: Read all instructions before assembly. Failure to do so may result in faulty assembly and potential injury. SPECIAL WARNINGS: Assemble on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Note: Identify all parts in carton and compare against the parts list. Remove all protective material carefully. To prevent scratching the surfaces, do not use a knife.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP ONE: ATTACHING RIGHT ARMREST • Make sure to place the Seat and Back (A) of the chair on a non-abrasive surface to avoid product damage. • Attach the Right Armrest (B) to the Seat and Back (A) by using M6*25mm Hex Bolts (L) and M6 Washers (H). • Do not tighten the bolts completely in this step. STEP TWO: ASSEBMBLING THE DECORATIVE TUBE • Insert the Decorative Tube (D) into the right armrest end hole.
PAGE 3
STEP THREE: ATTACHING THE LEFT ARMREST • Left Armrest (C) end hole cover the Decorative Tube (D) end. Attach the Left Armrest (C) to the frame assembled in step two by using M6*25mm Hex Bolts (L) and M6 Washers (H). • Do not tighten the bolts completely in this step. STEP FOUR: ATTACHING THE SUPPORT TUBE • Attach the Support Tube (E) to the armrests frame with the M6*15mm Hex Bolts (J) and M6 Washers (H). • Do not tighten the bolts completely in this step.
PAGE 4
STEP SIX: ASSEMBLING THE CHAIR SEAT TO THE BASE • Place the Base (G) on a flat surface and align the stem under the seat frame with the hole on the base. Push down firmly to lock the seat frame and Base (G) together. BACKYARD CREATIONS® MANUFACTURER‘S WARRANTY (Limited 1-Year Warranty) This product is covered under the manufacturer’s one year limited warranty against defects in workmanship and materials.