Assembly Instructions

F
A
2
2
4
4
3
3
B
C
E
D
B
C
F
4
2
4
2
3
3
1
3
2
4
Assembling the Inside Legs
Assembling the Outside Legs
to the Inside Legs
Assembling the Outside Legs
Attaching the Legs to the Top
Apply glue (6) inside the holes in the Inside Legs (B) and
attach the short batten (E) and the round batten (F).
Then, fix the parts with Bolts (5) using the included Allen
Key (1) .
Attach the Outside legs (C) to the Inside legs (B) with
the pins (2), screws (3) and washers (4), and using the 2
Allen Keys (1).
Apply glue (6) inside the holes in the Outside Legs (C) and
attach the long batten (D). Then, fix the parts with Bolts (5)
using the included Allen Key (1).
Attach the Outside legs (C) to the batten on the bottom
of the Table Top (A) with the pins (2), screws (3) and
washers (4), and using the 2 Allen Keys (1). Lock the
round batten (F) to the top hardware as shown.
B
C
E
D
B
C
F
5
5
5
5
5
6
6
5
Notes: Do not completely tighten any
bolts and screws until the unit is fully
assembled and set on a level surface.