Specifications

Print2CAD OCR 2013- 95
Print2CAD
OCR 2013
12.1 Smoothing of Polylines
The polylines must be smoothed out after vectorization. The less smooth the line prior
to vectorization, the less smooth the nal converted line and in fact it may be wavy or
jagged depending upon the quality of the original le.
12.2 Enforce Smoothing Motion
This setting caused the polylines created during vectorization to be smoothed or rendered
less wavy and/or jagged. This is not a x all, but it improves the conversion.
12.3 Max gap jump in pixels
The maximum gap in pixel traces that is lled in can be adjusted. Optimally, 3 to 7 pixels.
Figure: A gap jump in a pixel trace