Specifications

Print2CAD OCR 2013 - 70
8.3 Sort Text Onto Separate Layer
When activating this function, all native text gets sorted onto a predetermined layer.
If there are no real text, but only polylines, hatches or raster images, the letters will not
be recognized as text.
8.4 Scale Factors for Blank Space Width
Text in PDF les is often placed as single letters. In this case the spaces are not available.
When Print2CAD is transforming letters to text, blank spaces get recognized with the
help of a substitute space width equating the letter “a.”
Should the space detection does not work properly, increase or reduce the substitute space
factor according to the below graphic (by trial and error):
Figure: Scale Factor for Blank Space
8.5 Scale Factors for Text Width and Height
If Print2CAD can’t nd the fonts used in the PDF in the Windows system, Print2CAD
will select a similar font. In doing so, the text width may change.
A workaround for this is the use of scale factors for the text width and height. The text
will be scaled by the given factor and placed left-aligned in the CAD drawing.