Specifications

Print2CAD OCR 2013- 125
Print2CAD
OCR 2013
22.2 Procedure
The initial point is an image le (raster graphic) that will be generated by Print2CAD
from the le being converted.
This image le has the name “le name_KazOcr.tif.” It is automatically generated in the
directory of the drawing being converted.
When using the OCR method with text separated in lines, a clear line weight is needed.
This OCR line weight can be specied in the OCR text recognition interface.
It is usually set to 0.4mm. If the texts are displayed blurry in the OCR viewer, set a lower
value.
Another helpful tool of the OCR text recognition is the separation of the texts.
A lot of PDFs feature texts as hatches. If this is the case, the separation can help to improve
the text recognition by automatically discarding of distracting lines, etc.