NEW HALO Remote User Guide
01 BACKFIRE Remote Layout Throttle Wheel: Acceleration/ Braking/Preview/Navigation A single button to power on/off your board and remote. Power Button: ON/OFF/Menu/Select Backfire boards can stay in standby mode for up to a day, within which the remote can be used to power the board on or off. Turbo Button: Turbo Mode/Tank Turn Mode/Main Menu S/E Double clicking the Power Button turns on the board's ambient lights. The color of the lighting changes with the riding mode.
Halo Remote User Guide BACKFIRE 03 Dashboard Layout 10 ECO 20 0 KPH R TRIP:14 KM 20 B ODO: 1142 KM Enable Bluetooth Enabled Connect to the Backfire APP for Firmware Updates Enable Cruise Control Enabled Enable TRIP: 14 KM ODO: 1142 KM Unlocked Fingerprint Unlock Enabled Remote automatically locks itself after 6 seconds of inactivity to prevent accidental inputs Current Trip Meter Displays the distance traveled since the board was powered on Odometer Displays the total distance traveled sinc
BACKFIRE 04 Pairing Instructions Hold the Power Button for 3 seconds to power ON/OFF the board. When both the remote and board are in the OFF state, hold the Power Button on both the board and remote at the same time for 3 seconds to pair. In the 4WD configuration, the rear controller (ESC1) should be paired before the front (ESC2).
产品使用指南 BACKFIRE 05 Ride Modes 10 20 ECO SPORT 20 0 38 20 KPH R 0 KPH B TRIP: 14 KM 25 R ODO: 14 KM TURBO 50 38 0 B TRIP: 14 KM ODO: 14 KM 50 KPH R B TRIP: 14 KM ODO: 14 KM ECO Mode Sport Mode Turbo Mode Default Mode after Pairing. Press the S/E Button once to activate Sport mode. The remote display will turn blue/red and vibrate once. Press the Turbo Button once to engage Turbo Mode.
07 BACKFIRE Advanced Settings Remote Power Board Power Board Power ESC TEMPERATURE : Motor & ESC Speed ECO Setting Acceleration 40% 80℃ 20% MOTOR TEMPERATURE : Acceleration ECO SETTING Motor & ESC 76℃ Brake Braking 70% Turbo Setting Select Motor & ESC to display their temperatures. Motor & ESC Select ECO Setting to adjust the Speed, Acceleration and Brake profile for ECO Mode.
产品使用指南 FINGERPRINT SETTINGS FINGERPRINT SETTINGS Fingerprint 1 Fingerprint 1 Fingerprint 2 Fingerprint 3 Safety Switch Fingerprint 2 Fingerprint 3 Safety Switch Delete Fingerprints ON Delete Fingerprints OFF ON The Safety Switch option enables/disables fingerprint unlock. OFF To remove all stored fingerprints, select the Delete Fingerprints option. Single fingerprint delete is currently not supported.
11 BACKFIRE Tank Turn Mode 10 10 10 ECO ECO ECO 0 0 KPH R TRIP: KPH R ODO: 142 KM 14 KM 0 TANK 0 20 B TRIP: 14 KM 20 0 KPH R B ODO: 142 KM TRIP: 14 KM 20 B ODO: 142 KM Press the Turbo Button twice to engage Tank Turn Mode. Press the Power Button once to disengage. Warning: Keep clear of the board when Tank Turn Mode is engaged. Standing on it may lead to serious injury.
产品使用指南 13 BACKFIRE Malfunctions DISCONNECTED BOARD OVER CURRENT Board and Remote are Disconnected Over-Current Protection Active Throttle Failure ! Board Over Voltage ! Throttle Wheel Requires Calibration Board Over-Voltage Motor Stalled Motor Stalled Abnormal Voltage Battery Cells out of Balance In the event you encounter any of these errors, please reach out to the Backfire Support Team for assistance.
25% Battery High Temp erature Unlock Failed High Temperature Warning: Battery Remote Low Power Fingerprint Unlock Failed Remote Power Under 25% 5% 10% 10% Board Low Power Board Low Power Remote Low Power Remote Power Under 10% Board Power Under 10% Board Power Under 5% ESC High Temperature High Temperature Warning: ESC 14 BACKFIRE Gear Ratio and Pole Pair Configurations Model 09 Drive Type Gear Ratio Pole Pairs G2 Black Hub - 10 ERA Hub - 10 G3 Hub - 10 Ranger X3 Hub -
CONTACT US Official Website：https://www.backfireboards.
Halo Remote User Guide 10
