Specifications

11
difference. This method is used by many members of the IAPPP and is recommended for novice
users.
The reticule and detector are critically aligned at the factory and the user should make no
adjustment. If the eyepiece is removed from its mount it may be necessary to realign the detector
that will probably have to be done at Optec. If dust on the reticule is troublesome, remove it by
blowing air (canned air for camera cleaning is suggested) through the 1.25-inch snout.
If the reticule ring needs to be adjusted in brightness, the circuit board mounted potentiometer
located on the bottom right corner of the main circuit board can be adjusted. Use a small
screwdriver to turn the control CCW to brighten the reticule or CW to dim it.