User manual

26 EyeLink 1000 Host Application

Click Help (F1) to access the online help page for

Camera Setup. All available key shortcuts are listed

on the Help screen.

Keyboard Shortcuts: F1 = open Help screen

Click ‘Calibrate’ to go to the Calibrate screen. After

setting up the camera and adjusting thresholds

(EyeLink 1000 and EyeLink 2000) or biases (EyeLink Remote), you need to

calibrate the system.

Keyboard Shortcuts: C = go to Calibrate screen

Click ‘Validate’ to go to the Validate screen. Validation

shows the experimenter the gaze position accuracy

achieved by the current calibration parameters. Validation should always be

run after Calibration.

Keyboard Shortcuts: V = go to Validate screen

or Click ‘Drift Correct’ to go to

the Drift Correct screen. A Drift Correction/Check is recommended before each

trial to ensure accuracy of the calibration parameters is maintained. Generally

this is initiated via the application running on the display PC.

Keyboard Shortcuts: D = go to Drift Correct screen

Click to go to the Video Setup screen. See “EyeLink

Video Overlay Option User’s Manual” for details. This

button is useful only if your system has been licensed for video overlay option.

Keyboard Shortcuts: W = Video overlay configuration.