User manual

ManualsBrandsBack to Basics ManualsBlenderSR1000

V Select to view video setup screen, if the overlay option is enabled.

O toggle on/off video overlay option.

F6 Select Record view (plot or gaze cursor).

F7 Select Record Plot Data Type.

ENTER Camera Setup screen

ESC Return to previous screen

F1 HELP screen

L Revert to configuration from last session. This is still saved even

when the PC is turned off.

D Load default configuration (DEFAULTS.INI)

2.3.2.4 Table 2.1: Lens Guide

Lens

Aperture Size

Tower Mount Desktop Mount

(Camera Level)

Desktop Mount

(Camera Angled)

Arm Mount

(Camera Level)

EyeLink

Remote

(Camera Level)

16 mm

(Short Arm)

- - -

IDEAL IDEAL

25 mm

(Long Arm)

IDEAL

Possible – closer

distance

suggested

IDEAL

Possible – closer

distance

suggested

35 mm -

IDEAL

Possible – further

distance

suggested

Possible –

further distance

suggested

2.3.3 Camera Setup Screen

2.3.3.1 Camera Setup Screen Purpose

This is the central screen for most EyeLink 1000 setup functions. From this

screen, the view from the camera can be optimized and the pupil and corneal

reflection (CR) detection threshold or biases can be established. The eye to be

tracked, tracking mode, pupil fitting model, search limits and display options

can be set. Calibration, Validation, and Drift Checking can be performed from

this screen.

Figure 2-4 Camera Setup Screen

22 EyeLink 1000 Host Application