User manual

Selecting Samples will record data samples to the

EDF file, and selecting Events will record on-line

parsed events.

Keyboard Shortcuts: F = alternates selection of

Samples and Events buttons

Record the raw (x, y) coordinate pairs from the

camera to the EDF file

Keyboard Shortcuts: 3 = toggle record Raw Eye Position on/off

Record head-referenced eye-rotation angle (HREF) to

the EDF file.

Keyboard Shortcuts: 4 = toggle record HREF Position on/off

Record gaze position data in the EDF file.

Keyboard Shortcuts: G = toggle Gaze Position record on/off

Record EyeLink button press events in the EDF file.

Keyboard Shortcuts: B = toggle Button Flags record on/off

Record external device data

(

from the parallel port or

EyeLink Analog Card) in the EDF file.

Keyboard Shortcuts: I = toggle Input Port Data record on/off

Select to view previous screen.

Keyboard Shortcuts: ESC= Previous Screen

Select to view Camera Setup screen.

Keyboard Shortcuts: ENTER = Camera Setup

Press Help (F1) to access the online help page for Set

Options screen. Keyboard shortcuts are listed on the

Help screen.

Keyboard Shortcuts: F1 = open Help screen

Clicking “Revert to Last” restores EyeLink settings to

the values active at the beginning of the current

session, which were also the settings active at the

end of the last session.

Clicking “Load Defaults” reverts to settings specified

in the DEFAULTS.INI file.

Keyboard Shortcuts: L= Revert to Last configuration; D= Load Defaults

20 EyeLink 1000 Host Application