User manual

Click “Set Options” for access to a variety of EyeLink

1000 options and settings on the Set Options screen.

Note that any value on this screen can be over-ridden during experiment setup

by commands coming from the Display PC.

Keyboard Shortcuts: S = go to Set Options

Click “Exit EyeLink” to end the EyeLink 1000 Host PC

application.

Keyboard Shortcuts: Ctrl + Alt + Q = Exit EyeLink

Click “Help (F1)” to access the online help page for the

Offline screen. All available key shortcuts are also listed

on the Help screen.

Keyboard Shortcuts: F1 = open Help screen

2.3.1.3 Offline Screen Key Shortcuts

ENTER go to Camera Setup

O go to the Output screen

S go to the Set Options screen

Ctrl + Alt + Q exit the EyeLink Host PC application

F1 view the Help and key shortcuts for the Offline screen

2.3.2 Set Options Screen

2.3.2.1 Set Options Screen Purpose

The Set Options screen allows many EyeLink 1000 tracker options to be

configured manually. This is useful when doing manual recording sessions that

are not driven by a Display PC using the EyeLink API, or to override or

manipulate options not set by the Display PC application. Ideally, all settings to

be crucially controlled are set by the Display PC application at runtime via a set

of API calls.

The Default Settings should be sufficient for many tracking applications.

EyeLink 1000 Host Application