User manual

ManualsBrandsBack to Basics ManualsBlenderSR1000

1.4 Physical Specifications

EyeLink 1000 Card

Half-length PCI 140 mm long by 100 mm high.

Eye Illumination

CLASS 1 LED PRODUCT (IEC 60825-1 Ed.1.2:2001)

Wavelength: 910 nm (Tower and Primate Mounts)

890 nm (Desktop and Arm Mounts)

Tower/Primate Mount Eye illumination level: less than 1

mW/cm² at >200mm from illuminator.

Desktop/Arm Mount Eye illumination level: less than 1

mW/cm² at >300mm from illuminator.

Ethernet Link

TCP/IP, 10/100BASE-T

Response box support

USB or parallel port

Analog output

Optional PCI card

Digital Control

Configurable

Host PC Operating system

ROMDOS 7.1 operating system

Display PC Operating system API

• Windows (2000, XP)

• MS-DOS

• Mac OS9

• Mac OSX

• Linux

Camera Data Cable

Supports cables up to 10 meters in length

Conforms to v1.0 and v1.1 of the CameraLink

specifications.

Operating conditions

10°C to 30°C, 10%-80% humidity (non-condensing)

For indoor use only.

Storage conditions

-10°C to 60°C, 10%-90% humidity (non-condensing).

Allow components to warm to room temperature before

unpacking or use after storage at temperatures below

10°C to prevent condensation.

EyeLink CL Camera Power

Requirements

+12V, 800 mA for camera alone, 1.6A when used with 2

illuminators.

12V, 2A external power supply with 2.5mm coaxial

(“barrel”) power connector (5.5x2.5x9.5mm).

Power supply must have EN 60950, UL 950, CSA 22.2

No. 950, or other equivalent safety approval, with LPS or

Class 2 rating.

Electromagnetic compatibility and

immunity

FCC Part 15, Subpart B: Class A unintentional radiators

CISPR 11:1997 and EN55011:1998 -- Class A

60950-1 (ed.1) Safety of ITE Equipment. CB test

certificate including US, Canada, and international

requirements.

UL 60950 3rd Edition, CSA C22.2 No 60950-00-

CAN/CSA

10 Introduction