User manual

Desktop Mount (Level) Desktop Mount (Angled)

Figure 1-2. EyeLink 1000 Desktop Mount with Camera Level and Angled

1.2.3 EyeLink 1000 Camera Mount Configurations

The EyeLink 1000 is available in four base hardware configurations (Desktop,

Tower, Arm and Primate Mounts). These configurations differ in the type of

mounting used for the EyeLink CL high speed camera and low output infrared

illuminator module.

The EyeLink 1000 Desktop Mount (Figure 1-2) sits below the display the

participant views during the experiment. There are two different Desktop

Mounts – one with the illuminator on the left (pictured in Figure 1-2), and one

with the illuminator on the right.

The Desktop Mount supports monocular, binocular, and Remote (monocular)

eye tracking at a variety of sampling rates, depending upon the licensing

options purchased. This is the only camera mounting option that allows

binocular recording for human participants.

Figure 1-3. EyeLink 1000 Tower Mount

6 Introduction