User manual

Introduction

1.1 Supporting Documents

This document contains information on using the EyeLink 1000 hardware, the

Host PC application, tutorials on subject setup and calibration, and the basics

of running an experiment. Information on system safety, maintenance, and

storage is also provided. Appendix A of this manual explains the use of the

optional analog output and digital inputs and outputs via a DT334 card.

Additional documents are also available:

A. EyeLink 1000 Installation Guide

– Describes a standard EyeLink 1000

system layout and environmental considerations as well as the process followed

to install the EyeLink 1000 hardware and software on both the Host and

Display PCs.

B. EyeLink Programmer’s Guide – Provides suggestions on how to program

experiments with EyeLink 1000 in Windows, including review of sample

experiments provided and documentation of supported functions.

SR Research Experiment Builder User Manual – Introduces an optional

visual experiment creation tool for creating EyeLink experiments on Windows

32 bit operating systems. This software allows for a wide range of sophisticated

experimental paradigms to be created by someone with little programming or

scripting expertise.

EyeLink Data Viewer User’s Manual – Introduces an optional Data

analysis tool, EyeLink Data Viewer, which allows interactive display, filtering,

and outputting of EyeLink EDF data.

NOTE: Please be sure to check http://www.sr-support.com for product and

documentation updates as they become available.