User`s manual

Specifications Hardware specifications of the CPU modules
12 – 2
12.2 Hardware specifications of the CPU modules
12.2.1 Basic model QCPU

Current consumption of base unit, power supply module and CPU module
Item Q00JCPU Q00CPU Q01CPU
Control method Stored program repeat operation
I/O control mode Refresh mode
Program language Ladder (LD), Instruction (IN), Sequential function chart (SFC), Function block
(FB), Structured text (ST)
Processing speed (sequence instruction) [ns/step]
LD: 200
160
100
MOV: 700
560
350
No. of I/O points
Usable on
program
2048 2048
Accessible to
the actual I/O
module
256 1024
Constant scan (Function for keep-
ing regular scan time)
1 to 2000 ms (Setting available in 1 ms unit.)
Program memory
No. of program steps
(Drive 0)
8 k 8 k 14 k
Memory size refer to sections 2.2.1and 4.2
Devices refer to section 4.1.1
Self diagnostic Plausibility of program, Watch Dog Timer (WDT monitor), battery monitor,
memory check, CPU check, line voltage monitor, fuse monitor, etc.
RUN/PAUSE contact One contact can be set up in X000 to 7FFF for each of RUN and PAUSE
Operation mode in case of error Stop or continue (set by parameters)
Output status after switching from
STOP to RUN
The outputs keep their status at the time, when the CPU stops, or they are
refreshed to the current process status with a delay time of one cycle.
Clock function
Year, month, date, hour, minute, second and day of the week (Automatic leap year detection)
Accuracy: –3.2 to +5.27 s (Typ. +1.98 s)/d at 0 °C
–2.57 to +5.2 7 s (Typ. +2.22 s)/d at 25 °C
–11.68 to +3.65 s (Typ. -2.64 s)/d at 55 °C
Allowable momentary power fail-
ure time
20 ms or less Varies depending on the power supply module
Current consumption (5 V DC)
0.26 A

0.25 A 0.27 A
Weight 0.66 kg 0.13 kg 0.13 kg
Tab. 12-2: Performance specifications of CPU types Q00J, Q00 and Q01