User`s manual

Memory card Memory cards and batteries
MELSEC System Q, Hardware 5 – 5
5.1.3 Installing and removing a memory card
Memory cards Q2MEM-1MBS and Q2MEM-2MBS
● Installation
The installation of the memory card is possible, when the power supply of the CPU is on.
Install the memory card into the CPU module, while paying attention to the orientation of
the memory card. Insert the memory card securely into the connector until the height of the
memory card reaches that of the memory card EJECT button (refer to sections 4.4.1 and
4.5.1).
● Removal
When removing the memory card from the CPU module, press the memory card EJECT
button to pull out the memory card (refer to sections 4.4.1 and 4.5.1). Using plastic tweezers
to pull out the memory card is effective when the memory card cannot be removed smoothly.
QH00027C
Fig. 5-2: Install the memory card
QH00028C
Fig. 5-3: Remove the memory card
Memory card EJECT button
CPU module
Memory card
Insert the memory card in that way, that the type label and the
printed warning point to the left side.
CPU module
Remove the memory card
Press the memory card EJECT button