Specifications

ManualsBrandsBack to Basics ManualsBlenderSM600

Ideal for the Aquarium market, the SMS122 pH controller

enables you to automate your dosing of CO

and makes

sure that the plants of your aquarium are always healthy.

Simply plug in the solenoid valve to the plug socket sup-

plied.

Every aquarium needs individual attention. This is why the

SMS510 has a user selectable set point for the ORP

(0 to 600 mV).

Simply plug the ozone generator into the controller’s

power plug and it will dose until the mV set point is

reached.

It will automatically switch on again if the ORP falls below

the adjusted point.

SMS125 has dual set points adjustable with knobs: for pH

(4 to 8 pH) and for ORP (-200 to 600 mV).

Simply attach 2 solenoid valves or pumps to the plug

sockets supplied to dose CO

and ozone as required!

Perfect and ideal where 24-hours maintaining is required.

Ordering Information

SMS122 is supplied complete with 12 VDC adapter,

MA911B/2 pH electrode, 20 mL pH4.01 sachet of calibra-

tion solution, 20 mL pH7.01 sachet of calibration solution-

calibration screwdriver and instructions.

SMS510 is supplied complete with 12 VDC adapter,

MA921B/2 ORP electrode and instructions.

SMS125 is supplied complete with 12 VDC adapter, power

plug socket for ozone dosing, MA911B/2 pH electrode,

MA921B/2 ORP electrode, 20 mL pH7.01 sachet of calibra-

tion solution, calibration screwdriver and instructions.

Specifications

SMS122 SMS510 SMS125

Range 0.0 to 14.0 pH ±1000 mV (ORP) 0.00 to 14.00 pH; ±1000 mV (ORP)

Resolution 0.1 pH 1 mV (ORP) 0.01 pH; 1 mV (ORP)

Accuracy (@25°C) ±0.2 pH ±5 mV (ORP) ±0.2 pH ; ± 5 mV (ORP)

Set point pH 5.5 to 9.5 pH 4 to 8 pH

Set point ORP 0 to 600 mV -200 to 600 mV

pH Alarm active when measurement is active when measurement is

higher than set point higher than the set points

ORP Alarm active when measurement is active when measurements are

lower than set point lower than set points

pH Output Power Socket active when measurement is active when measurement is

higher than set point (5A max) higher than set point

ORP Output Power Socket active when the measurement is active when the measurement is

lower than set point lower than set point

pH Electrode MA911B/2 (included) MA911B/2 (included)

ORP Electrode MA921B/2 (included) MA921B/2 (included)

Environment 0 to 50°C / 32 to 122°F; max RH 95% 0 to 50°C / 32 to 122°F; max RH 95% 0 to 50°C / 32 to 122°F; max RH 95%

Power Supply 12 VDC power adapter (included) 12 VDC power adapter (included) 12 VDC power adapter (included)

Power Drivers 115VAC, 2A, 60Hz or 230VAC, 1A, 50Hz 115VAC, 2A, 60Hz or 230VAC, 1A, 50Hz 115VAC, 2A, 60Hz or 230VAC, 1A, 50Hz

Dimensions 160 x 80 x 40 mm 160 x 80 x 40 mm 160 x 80 x 40 mm

Weight 220 g (meter only) 220 g (meter only) 220 g

Accessories

M10004B pH 4.01 buffer solution 20 mL

sachet (25 pcs)

M10007B pH 7.01 buffer solution 20 mL

sachet (25 pcs)

M10010B pH 10.01 buffer solution 20 mL

sachet (25 pcs)

M10000B Electrode rinse solution 20 mL

sachet (25 pcs)

MA9015 Electrode storage solution 20 mL

sachet (25 pcs)

MA955 Solenoid valve with 1.5 m cable

MA911B/2 Double junction, gel filled pH electrode

with 1 m cable (will be replaced

by SE220/2)

SE220/2(*)pH electrode with BNC connector

and 1 m cable

MA921B/2 ORP Electrode with BNC connector

and 2 m cable (will be replaced by

SE300/2)

SE300/2(*)ORP Electrode with BNC connector

and 2 m cable

(*) Available from the 1

of September 2011

SMS122/SMS510/SMS125

pH & ORP Controllers

pH/ORP