COMMITTED TO TOTAL CUSTOMER SATISFACTION Milwaukee is a dynamic worldwide manufacturer of electrochemical Instrumentation for water analysis to measure pH, Redox, Conductivity, Salinity, Dissolved Oxygen, Temperature, Turbidity, Chlorine, Ammonia, Copper, Chloride, Phosphate, Iron, etc.
Symbols CE CE certified products IP67 IP67 rated housing protects instrument from water and dust Contents New Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 pH/ORP/ISE/Temp Measurements pH/Temp Bench Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 pH/ORP/Temp Bench Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 pH/ORP/ISE/Temp Bench Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Highlights Highlights in this Catalogue New NEW Handy Photometers. The revolutionary new range of Milwaukee handy photometers are compact and easy to use, have a modern design, and measure Free Chlorine (MW10); Total Chlorine (MW11); Phosphate (MW12); Iodine (MW13) and Iron (MW14). Within a few minutes you can get the required result on the LCD and the meter automatically turns off after 2 minutes in order to save the battery life. New New Line of MW Portable Meters.
pH/ORP Mi150 pH/Temperature Laboratory Bench Meter Mi150 is an advanced pH/Temp microprocessor-based bench meter. It is ideal for students and technicians who need fast and reliable measurements.
pH/ORP Mi151 pH/ORP/Temperature Laboratory Bench Meter This high performance economy microprocessor-based pH/ORP/Temp Bench meter is an ideal tool in schools, laboratories and production plants.
pH/ORP Mi160 pH/ORP/ISE/Temperature Laboratory Bench Meter New This new pH/ORP/ISE/Temp bench meter is ideal for very accurate and precise measurements for all laboratory needs. It can perform ion-selective measurements directly in ppm, as well as pH, ORP and temperature measurements. pH calibration can also be performed in 3 points selectable between 7 memorized buffers, to provide a very accurate calibration curve even when testing different samples, where very wide differences in pH can be found.
pH Electrodes pH Electrode basics pH electrodes are constructed from a special composition glass which senses the hydrogen ion concentration. This glass is typically composed of alkali metal ions. The alkali metal ions of the glass and the hydrogen ions in solution undergo an ion exchange reaction, generating a potential difference. In a combination pH electrode, the most widely used variety, there are actually two electrodes in one body.
pH Electrodes pH Electrode basics The pH electrode, due to the nature of its construction, needs to be kept moist at all times. In order to operate properly, glass needs to be hydrated. Hydration is required for the ion exchange process to occur. If an electrode should become dry, it is best to place it in some tap water for half an hour to condition the glass. pH electrodes are like batteries; they run down with time and use. As an electrode ages, its glass changes resistance.
pH Electrodes pH Electrode basics Single Junction Electrode Double Junction Electrode This junction can become clogged by particulates in the solution and can also facilitate poisoning by metal ions present in the solution. If a clogged junction is suspected it is best to soak the electrode in tap water to dissolve the material and clear the junction. When not in use it is best to store the electrode in either buffer 4.0 or buffer 7.0.
pH Electrodes pH Electrode basics Temperature compensation: When measuring pH using a pH electrode the temperature error from the electrode varies based on the Nernst Equation as 0.03pH/10C/unit of pH away from pH7. The error due to temperature is a function of both temperature and the pH being measured. Temperature compensation can be achieved manually or automatically.
pH/ORP Mi105 Portable pH/Temp Meter Extended Range pH and Temperature Meter in a compact casing The included electrode has a built-in temperature sensor and amplifier to prevent electrical interference. The large display shows readings in an extended range from -2.00 to 16.00 pH and simultaneously shows temperature from -5.0 to 105.0°C or 23 to 221°F. The Mi105 has a stability indicator and hold feature that freezes the display for easy and accurate recording.
pH/ORP Mi106 Portable pH/ORP/Temp Meter Extended Range pH/ORP/Temperature Meter The Mi106 multi parameter portable meter is ideal for field measurements. The included combined pH/ORP electrode has a built-in temperature sensor and amplifier to prevent electrical interference. The large display shows readings in an extended range from -2.00 to 16.00 pH or ±2000 mV and simultaneously shows temperature from -5.0 to 105.0°C or 23 to 221°F.
pH/ORP MW100/MW101/MW102/MW500 Entry level, inexpensive pH/ORP/Temperature Portable Meters for fast and reliable results New MW100, MW101, MW102 and MW500 are compact pH, ORP and Temperature Portable Meters with Faster Micro Processor. These handy and ergonomically designed portable meters are ideal for anyone working on a low budget and still requires fast and reliable measurements.
pH/ORP SM100/SM101/SM102/SM500 Portable pH/ORP/Temp Meters Smart portable meters with no frills! Milwaukee’s low cost durable meters for quick and reliable measurements. Milwaukee’s Smart meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use. • SM100 performs pH measurements with a 0.1 pH resolution and with manual temperature compensation. • SM101 performs pH measurements with a 0.
pH/ORP pH55/pH56 Pocket-size pH/Temperature Meters with replaceable electrode IP67 Waterproof pH testers with Large dual-level LCD that displays pH and temperature (°C or °F). The large display shows readings in an extended range from -2.0 to 16.0 pH (pH56 has a 0.01 pH resolution) and simultaneously shows temperature from -5.0 to 105.0°C or 23.0 to 221.0°F. They have a stability indicator and hold function that freezes the display for easy and accurate recording.
pH/ORP ORP57/pH58 Pocket-size pH/ORP/Temperature Meters with replaceable electrode Combination waterproof testers with advanced functions also include the new model pH58 for simultaneous pH and ORP measurements and temperature, which is continuously displayed on the dual level LCD. It shows readings in an extended range from -2.00 to 16.00 pH or ±1000 mV and simultaneously shows temperature from -5.0 to 105.0°C or 23 to 221°F.
pH/ORP pH51/pH52/pH53/ORP50 Microprocessor Waterproof pH/ORP/Temp Meters Sharp waterproof Testers are designed for all applications. Their IP67 waterproof casings and double junction replaceable electrodes make them suitable also for heavy duty applications, such as wastewater treatment and agriculture. The modular design allows easy electrode and battery replacement. Manual calibration on the pH51 prolongs the battery life up to 1500 hours. pH51 and pH52 have a 0.1 pH resolution while pH53 has 0.
pH/ORP pH40/pH41/pH42 Microprocessor pH Testers The Sharp pH Tester Series features an extendable cloth reference junction system which eliminates reading errors from clogged junctions. Using tweezers, the cloth junction can be extended to expose new unused portions greatly extending the life of the electrode. The Sharp Tester microprocessor provides the user with push button calibration and automatic buffer recognition. Auto Shut-off after 10 minutes saves on battery life.
pH/ORP SMS110/SMS115/SMS120 pH Monitors The Smart pH monitor allows you to continuously monitor pH values directly in your reservoir. Features include: user selectable set point (for SMS110 and SMS120), visual LED alarm when values go above the set point and manual calibration. The SMS115 with the Cal-test button will warn the user when the electrode needs to be calibrated again. Each monitor is powered by a 12 VDC adapter and is ideal for applications such as Hydroponic and Aquarium.
pH/ORP SMS122/SMS510/SMS125 pH & ORP Controllers Ideal for the Aquarium market, the SMS122 pH controller enables you to automate your dosing of CO2 and makes sure that the plants of your aquarium are always healthy. Simply plug in the solenoid valve to the plug socket supplied. Every aquarium needs individual attention. This is why the SMS510 has a user selectable set point for the ORP (0 to 600 mV).
EC/TDS Mi170 Autoranging EC/TDS/NaCl/Temperature Laboratory Bench Meter Mi170 measures 4 different parameters - EC, TDS (Total Dissolved Solids), percentage of NaCl and temperature in a variety of ranges. The auto-ranging feature for EC and TDS measurements automatically sets the resolution suitable to the tested sample. All measurements can be temperature compensated at 20 or 25°C and the compensation coefficient is selectable by the user.
EC/TDS Mi306 Automatic & Logging EC/TDS/NaCl Temp Meter Mi306 is a waterproof portable logging microprocessorbased Conductivity/TDS/NaCl/temperature meter. The autoranging feature of the EC and TDS ranges automatically sets the meter to the scale with the highest possible resolution. The Auto Endpoint (HOLD) feature automatically freezes the display when a stable reading is reached. The measurements are automatically (ATC) or manually (MTC) compensated for temperature.
EC/TDS MW301/MW302/MW401/MW402 Entry level, inexpensive Conductivity & TDS Portable Meters for fast and reliable results New MW300, MW301, MW401 and MW402 are compact Conductivity and TDS Portable Meters with Faster Micro Processor. These handy and ergonomically designed portable meters are ideal for anyone working on a low budget and still requires fast and reliable measurements.
EC/TDS SM301/SM302/SM401/SM402 Portable Conductivity & TDS Meters SM301, SM302, SM401 and SM402 are conductivity and TDS Portable Meters, with Automatic Temperature Compensation, and are ideal for the educational and agricultural markets. Soil conductivity is checked before fertilizer application to pinpoint field needs and after fertilization to establish its effectiveness. The EC testing provides all agricultural operation with a method to optimize chemical applications and minimize operational cost.
EC/TDS EC59/EC60 Pocket-size EC/TDS/Temp Meters These new waterproof Pocket-size EC/TDS/Temp Meters include features such as a replaceable probe, temperature in °C or °F, automatic temperature compensation with adjustable β, battery level indicator, stability indicator, automatic shut-off and automatic calibration all in a floating, waterproof casing. EC59 shows on the dual-level LCD the EC (3999 µS/cm) or TDS (2000 ppm) value. It also displays the temperature from 0.0 to 60.0°C (or 32.0 to 140.
EC/TDS C65/C66/T75/T76 Sharp Waterproof Conductivity & TDS testers These simple and easy-to-use testers are designed for all applications. Its IP67 Waterproof casing and replaceable probe make them suitable also for heavy duty applications, such as Wastewater treatment and Agriculture. The modular design allows easy probe and battery replacement.
EC/TDS C61/C62/T71/T72 High accuracy Conductivity and TDS Testers These simple 1-point calibration testers are designed for the Horticultural and Agricultural market. They are built in a one-piece splash-proof casing and they are immersible up to the LCD. All models have Automatic Temperature Compensation and the temperature sensor housing is made out of 316 inox steel instead of plastic. This ensures 100 times faster readings and higher accuracy.
EC/TDS SMS310/SMS410/SMS315/SMS415 Conductivity and TDS Monitors Reliable Conductivity and TDS monitors with Automatic temperature compensation and 1 point manual calibration powered by a 12 VDC adapter. They are ideal for the hydroponic market and allow you to continuously monitor EC or TDS values directly in your reservoir. Other features include: user selectable set point, visual LED alarm when values go below the set point (for SMS310 and SMS410).
Dissolved Oxygen Mi190 Extended Range Bench Dissolved Oxygen Meter Ideal for testing Dissolved Oxygen in the pharmaceutical and food Industry, as well as monitoring in water treatment plants. The user can choose to measure D.O. readings in mg/L or % of saturation of O2. This meter can be used for any type of water, as it allows measurements to compensate for temperature, altitude and salinity factors. The automatic logging interval can be set to perform analysis and store data into the memory.
Dissolved Oxygen Mi605 Portable D.O. Meter for Field Applications Mi605 is a portable, microprocessor-based, Dissolved Oxygen meter with automatic calibration and temperature compensation (ATC) specifically designed for spot sampling applications. Dissolved Oxygen measurements can be displayed in parts per million (ppm=mg/L) or in % of saturation. The temperature is indicated in Celsius from 0 to 50°C with 0.1 resolution. The meter compensates salinity and altitude automatically after manual input.
Dissolved Oxygen MW600 Entry level, inexpensive Dissolved Oxygen Portable Meter for fast and reliable results New The MW600 is a compact Portable Dissolved Oxygen meter with Faster Micro Processor. This handy and ergonomically designed portable meter is ideal for anyone working on a low budget and still requires fast and reliable measurements.
Dissolved Oxygen SM600 Portable Dissolved Oxygen Meter for Education The SM600 is a Portable Dissolved Oxygen meter ideal for use in school laboratories. Dissolved Oxygen measurements are also very important in fish farms and ponds, where Oxygen levels are continuously monitored to obtain optimal reproduction. The SM600 calibrates easily in 2 points (at 100% saturated air and in 0 Oxygen solution) and has Automatic Temperature Compensation which guarantees the highest accuracy.
MULTI Mi180 pH/ORP/EC/TDS/NaCl/Temperature Laboratory Bench Meter Mi180 measures 6 different parameters: pH, ORP, EC, TDS (Total Dissolved Solids), percentage of NaCl and temperature in a variety of ranges. pH calibration can be performed in 3 points selectable between 7 memorized buffers, to provide a very accurate calibration curve even when testing different samples, where very wide differences in pH can be found.
MULTI Mi805/Mi806 Portable pH/EC/TDS/Temperature Meters Measures 4 parameters with 1 single probe. Mi805 and Mi806 offer you a combination of pH, Conductivity, total dissolved solids and temperature measurements. You can select from a range of calibration buffers and also the temperature scale (°C or °F) can be selected. The multi-parameter probe MA851D/1, includes pH/EC/TDS and temperature, all in one rugged handle. Other features include different TDS factors from 0.45 to 1.
MULTI MW801/MW802 Entry level, inexpensive pH/EC/TDS Portable Meters for fast and reliable results New MW801 and MW802 are compact Portable Meters with Faster Micro Processor. These meters allow you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe! These easier and faster to calibrate portable meters have a smaller, ergonomic and lighter case design. Other features include 100% larger and easier to read LCD Display and long battery life.
MULTI SM801/SM802 Portable pH/EC/TDS combination Meters 3 meters in 1! These meters allow you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe! The SM801 with a Conductivity range that goes up to 1990 µS/cm and TDS range that goes up to 1990 ppm is an ideal tool for drinking water measurements. The SM802, with a conductivity range that goes up to 6.00 mS/cm and the TDS up to 4000 ppm is ideal for testing in crop production.
LUX MW700/SM700 Entry level, inexpensive LUX Portable Meters for fast and reliable results MW700 and SM700 are portable Lux meters designed to perform light measurements. MW700 with Faster Micro Processor, has a smaller, ergonomic and lighter case design. Other features include 100% larger and easier to read LCD Display and long battery life. New These handy and ergonomically designed portable meters are ideal for anyone working on a low budget and still requires fast and reliable measurements.
pH/Cl2 Mi411 Free & Total Chlorine and pH Photometer This latest laboratory grade Microprocessor photometer has an excellent repeatability and is ideal for field measurements. Chlorine is the most commonly used water disinfectant. Applications vary from treatment of drinking water and wastewater to pool and spa sanitization and food processing to sterilization.
NH3-N/Fe/PO4 Mi405/Mi407/Mi408/Mi412 Ammonia, Iron & Phosphate Photometers These user-friendly readings in mg/L. Colorimeters will give you direct Ammonia detection in water treatment systems is particularly important for aquarium owners and fish farm operators. Ammonia is highly soluble in water and extremely toxic to fish. Fish farm owners must monitor and maintain careful control of ammonia levels to ensure optimum water conditions for their stock.
Cl2/Cl¯ Mi404/Mi406/Mi413/Mi414 Free & Total Chlorine and Chloride Photometers Milwaukee provides a range of chlorine photometers for all applications: swimming pool treatments, household cleaners, dishwasher additives, laundry powders/liquids and cooling water treatment products all contain chlorine as an oxidizing biocide. Drinking water contains residual chlorine to maintain water purity throughout the supply lines.
Cl MW10/MW11 Low cost digital photometers to measure Free & Total Chlorine New Chlorine is the most commonly used water disinfectant. Applications vary from treatment of drinking water and wastewater to pool and spa sanitization and food processing to sterilization. Milwaukee offers 2 models: MW10 for measuring free chlorine (0.00 to 2.50 mg/L) and MW11 to measure total chlorine (0.00 to 3.50 mg/L).
PO4/Fe/I MW12/MW13/MW14 Low cost digital photometers to measure Phosphate,Iron & Iodine New Iron is naturally present in water supplies and therefore needs to be monitored both in potable and industrial applications. Milwaukee offers the MW14 Iron meter with a range of 0.00 to 5.00 mg/L. Phosphates are present in natural waters and at concentrations typically found, do not pose any specific health threats to humans.
Turbidity Mi415 Turbidity Meter Turbidity refers to the concentration of undissolved, suspended particles present in a liquid. Turbidity is a measure of the clarity of a sample. For potable water applications turbidity is a good indicator of water quality. New Turbidity Measurement is achieved by analyzing the amount of light refracted from suspended particles such as clay, silt and organic material.
Digital Refractometers MA871/MA872/MA873/MA881 Digital Refractometers for Brix, Fructose, Glucose and Invert Sugar Measurements New The digital refractometers are optical instruments that employ the measurement of refractive index to determine the % Brix of sugar (MA871), % Fructose (MA872), % Glucose (MA873) and % Invert Sugar (MA881) in aqueous solutions. The method is both simple and quick. Samples are measured after a simple user calibration with deionized or distilled water.
Digital Refractometers MA882/MA883/MA884/MA885 Digital Refractometers for Grape Juice Must Measurements New The MA882, MA883, MA884 and MA885 are optical instruments that are based on the measurement of the refractive index of a solution. The measurement of refractive index is simple and quick and provides the vintner an accepted method for sugar content analysis. Samples are measured after a simple user calibration with deionized or distilled water.
Digital Refractometers MA886 Digital Refractometer for Sodium Chloride Measurements New The MA886 is an optical instrument that employs the measurement of the refractive index to determine sodium chloride concentration in aqueous solutions used in food preparation. It is not intended for sea water salinity measurements. The measurement of refractive index is simple and quick and provides the user an accepted method for NaCl analysis.
Digital Refractometers MA887 Digital Refractometer for Seawater Measurements New The MA887 is an optical instrument that employs the measurement of the refractive index to determine the salinity of natural and artificial seawater, ocean water or brackish intermediates. The digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for ship, shore or home use. The MA887 refractometer is an optical device that is simple and quick to use.
Digital Refractometers MA888 Digital Refractometer for Ethylene Glycol Measurements The MA888 is an optical instrument that employs the measurement of the refractive index to determine the % volume and freezing point of ethylene glycol based coolants or antifreeze. New The digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for use in the field to optimize your cooling system.
Electrodes Electrodes & Probes pH, ORP, Conductivity, Dissolved Oxygen Milwaukee has a wide assortment of pH, ORP, Conductivity and other specialty sensors to meet all your specific requirements. Finding the right electrode for a specific application is a very important task and in order to solve this selection problem it is important to consider the following: electrode body, reference construction and junction.
Electrodes Electrode Selection Guide pH, ORP, Conductivity, Dissolved Oxygen Milwaukee has a wide assortment of pH, ORP, Conductivity and other specialty sensors to meet all your specific requirements. Before selecting an electrode, please consult the table below.
Test Kit pH Electrode Storage and Maintenance Plastic body pH electrode Glass body pH electrode Fill hole screw Reference fill hole Fill hole sleeve cover Reference fill hole Reference fill hole Sensitive wire Reference wire Reference wire Sensitive wire Reference junction Reference junction Platinum or gold tip Glass bulb pH Electrode Storage and Maintenance To ensure a quick response and free-flowing liquid junction, the sensing element and reference junction must not be allowed to dry out.
Testers pH600/CD600/CD601/CD610/CD611/CD97 pH/EC & TDS Economical Pocket Testers Milwaukee's economical testers are easy-to-use and low cost instruments to measure quick and reliable pH, EC or TDS values. Measuring electrical conductivity is the best way of checking the amount of salt or dissolved solids (TDS) in water. Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions.
Calibration Solutions Calibration, Maintenance & Cleaning Solutions Milwaukee offers a wide range of calibration, maintenance & Cleaning solutions. The use of calibration and cleaning solutions is fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings. Often readings are not correct because the sensors have not been properly handled. Milwaukee standard solutions are available in 230 mL bottles and 20 mL sachets.
Warranty WARRANTY POLICY Milwaukee warrants it’s instruments to be free of manufacturing defects as follows: bench meters for 3 years, portable and pocket testers for 2 years and electrode/sensors for 6 months (unless otherwise specified). The warranty period commences from the original date of sale to the user. Warranty is valid only when the product is used under normal conditions and in accordance with the operating limitations and prescribed maintenance procedures.
