User`s manual

A - 16
ABOUT MANUALS
Before constructing or designing the safety-related system, be sure to read the following
manual.
The following manuals are also related to this product.
In necessary, order them by quoting the details in the tables below.
Remark
Printed materials are separately available for single item purchase. Order the
manual by quoting the manual number on the table above (Model code).
Introduction Manual
Manual Name
Manual No.
(Model Code)
Safety Application Guide
Explains the overview and construction method of the safety-related system, laying and wiring examples,
application programs and others.
(Sold separately)
SH-080613ENG
(13JR90)
Related Manuals
Manual Name
Manual Number
(Model Code)
QSCPU User's Manual (Hardware Design, Maintenance and Inspection)
Explains the specifications of the QSCPU, safety power supply modules, safety base unit and other.
(Sold separately)
SH-080626ENG
(13JR92)
QSCPU Programming Manual (Common Instructions)
Explains how to use the sequence instructions and application instructions.
(Sold separately)
SH-080628ENG
(13JW01)
CC-Link Safety System Master Module User's Manual
QS0J61BT12
Explains the specifications, procedures and settings up to operation, parameter settings and troubleshooting of
the QS0J61BT12 type CC-Link Safety system master module.
(Sold separately)
SH-080600ENG
(13JR88)
CC-Link Safety System Remote I/O Module User's Manual
QS0J65BTB2-12DT
Explains the specifications, procedures and settings up to operation, parameter settings and troubleshooting of
the CC-Link Safety system remote I/O module.
(Sold separately)
SH-080612ENG
(13JR89)
Q Corresponding MELSECNET/H Network System Reference Manual (PLC to PLC network)
Explains the specifications for a MELSECNET/H network system for PLC to PLC network. It explains the
procedures and settings up to operation, setting the parameters, programming and troubleshooting.
(Sold separately)
SH-080049
(13JF92)
GX Developer Version 8 Operating Manual
Explains the online functions of the GX Developer, such as the programming, printout, monitoring, and
debugging methods.
(Sold separately)
SH-080373E
(13JU41)
GX Developer Version 8 Operating Manual (Safety PLC)
Explains the added and updated GX Developer functions to support the safety PLC.
(Sold separately)
SH-080576ENG
(13JU53)