User`s manual

8
PARAMETERS
8.1 PLC Parameters
8 - 9
1
Overview
2
Performance Specification
3
Sequence Program Configuration and Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files Handled by CPU Module
6
Functions
7
Communication with Intelligent Function Module
8
Parameters
(8) Safety settings
Set the operation settings in continuous RUN in test mode and for remote station error
status.
Diagram 8.8 Safety settings
Table8.8 Safety settings
Item Parameter No. Description Setting range Default value Reference
Continuous RUN in test
mode
6000
H
Set the continuous RUN
tolerance time in TEST MODE.
1 second to 86400 seconds 10 seconds Section 6.5
Operation settings for
remote station error
status
Set the operation settings for
remote station errors
Stop/Continue Continue ----