User`s manual

8
PARAMETERS
8.1 PLC Parameters
8 - 7
1
Overview
2
Performance
Specification
3
Sequence Program
Configuration and
Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files
Handled by CPU Module
6
Functions
7
Communication with
Intelligent Function
Module
8
Parameters
(6) I/O assignment
Set the mounting status of each module in the system.
Diagram 8.6 I/O assignment
Table8.6 I/O assignment list
Item Parameter No. Description Setting range Default value Reference
I/O
assignment
Type
0400
H
Set the type of the mounted
module.
Empty/intelli. No setting
Section 4.3
Model
name
Set the model name of the
mounted module. (User memo.
Not used for the CPU module.)
16 characters No setting
points
Set the number of points of each
slot.
0 points/16 points/32 points/
48 points/64 points/
128 points/256 points/
512 points/1024 points
No setting
Start XY
(Start I/O
No.)
Set the start I/O number of each
slot.
0
H to 3F0H No setting
Standard
setting
Base
model
name
0401
H
Set the model name of the used
main base unit. (User memo. Not
used for the CPU module.)
16 characters No setting
Section 4.4
Power
model
name
Set the model name of the
power supply module mounted
on the main base unit. (User
memo. Not used for the CPU
module.)
16 characters No setting
Extension
cable
Set the extension cable model
name. (User memo. Not used for
the CPU module.)
16 characters No setting
Slots
Set the number of slots of the
main base unit.
4 No setting
Switch setting 0407H Unusable Unusable ---- ----