User`s manual

8
PARAMETERS
8 - 1
1
Overview
2
Performance Specification
3
Sequence Program Configuration and Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files Handled by CPU Module
6
Functions
7
Communication with Intelligent Function Module
8
Parameters
CHAPTER8 PARAMETERS
This chapter explains the parameters that are set when a PLC system is configured.
(1) Parameter types
There are the following CPU module parameters.
• PLC parameter ( Section 8.1)
Set when the PLC is used independently.
• Network parameter ( Section 8.2)
Set when the CC-Link Safety master modules and MELSECNET/H module are
used in combination with the PLC.
(2) Parameter setting method
Set the parameters by GX Developer.
Refer to the following manual for the setting operation on GX Developer.
For details on basic operations using GX Developer, refer to the following manual.
GX Developer Operating Manual
POINT
In GX Developer, since the functions are not available to the CPU module being
used, it is not necessary to set the setting items displayed in gray (cannot be
selected) that are not explained in this section.
Remark
• When an error occurs in the parameter setting, the corresponding
parameter No. indicated in the tables of this chapter is stored into the
special register (SD16 to 26).
Refer to Appendix 3 for the list of the parameter No.
• Refer to CHAPTER 11 for the parameter reflection procedure.