Owner`s manual

2-15
Mode 2: Automatic Door Locking Only
Automatic Door Unlocking: The automatic door
unlock feature is turned off.
Automatic Door Locking: Shift out of PARK (P)
with the ignition on and the drivers door closed, all
doors will lock automatically.
Mode 3: Automatic Unlocking with the Ignition Off
Automatic Door Unlocking: Turn off the ignition
with the transaxle in PARK (P) and all doors will
unlock automatically.
Automatic Door Locking: Shift out of PARK (P)
with the ignition on and the drivers door closed and
all doors will lock automatically.
Mode 4: Automatic Unlocking and Locking with
Transaxle in PARK (P)
Automatic Door Unlocking: Shift into PARK (P)
with the ignition on and all doors will
unlock automatically.
Automatic Door Locking: Shift out of PARK (P)
with the ignition on and the drivers door closed and
all doors will lock automatically.
When your vehicle is shipped from the factory, it will be
in Mode 3.
To change the mode do the following:
1. Follow the instructions for “Entering Programming
Mode” listed previously.
2. Press LOCK on the power door lock switch.
3. Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is set
for. You change the mode by pressing LOCK on the
power door lock switch again.
4. Repeat Step 2 until you hear the number of chimes
that matches the mode you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
earlier in this section or program the next feature
available on your vehicle.