User manual

Chapter 4: Using the web interface
The Dashboard 63
4444
Using the web interface
Start/stop Standard data on the LAN interface
By default, Standard data is always activated on the terminal. If you only want
Standard data to be activated when you have specifically enabled it, you can
disable automatic activation using the SETTINGS > LAN > Network user groups
page.
When automatic activation is disabled in the LAN page, you can manually
start/stop your Standard data profile from the Dashboard by clicking Start
<name of profile> or Stop <name of profile> under PROFILES ON LAN at the
bottom of the page.
If a primary profile is already active, your new profile will not appear as a link
but as plain text. The active primary profile is displayed as a link with the text
“Stop <name of profile>”. Click this link first to stop the active profile. Then
click your new profile, which is now displayed as a link.
Note
If another primary profile is active you must stop it before you can
start your new profile.