User manual

Chapter 4: Using the web interface
Managing LAN network users 101
4444
Using the web interface
2. Click Edit next to the user group you want to set up.
3. Type in a name for the group.
4. Select Enabled or Disabled.
5. Select the type of Internet connection.
• Shared means the connection will be shared with other users, and the
NAT module of the terminal will make the necessary address
translations. Use this mode if one or more computers are connected
using the LAN interface, and the terminal should act as a router.
• Direct is an exclusive connection, with NAT disabled. Use this mode
together with a network classification entry that selects a single
computer. This mode is not available in the Default user group.
Note
For further explanation of the below settings, see Definitions for
network terms on page 109.