User manual

Chapter 4: Using the web interface
86 Setting up the interfaces
•For Outgoing calls, you can select either Standard or 3.1 kHz Audio.
The selected type will be used by default, if possible, for any outgoing
call. Note, however, that fax machines and modems must use 3.1 kHz
Audio.
3. Click Apply.
Note
You can override the default setting for outgoing calls by dialing
1* (force the call to Standard) or 2* (force the call to 3.1 kHz
Audio) before the number. For further information, see
Overriding the default outgoing call type on page 36.