User`s guide

Physios
Controls
5-6 Revision D.0
Setup
For complete details about Physio controls for contrast imaging, see Using
Contrast Imaging.
WARNING Do not use ECG patient cables with detachable lead wires that have
exposed male pins. Electrocution could result if these pins are
plugged into an AC power.
ECG Selects an input source for the ECG waveform, or turns
the waveform off.
ECG Output Lets you take the ECG signal from the ECG output on
the back of the system and use the signal as input to
another device.
Filter Removes frequencies below the hertz level specified.
Only available when Hrtsound Normal is activated.
Hrtsound Selects an input source for the heart sound waveform,
or turns the waveform off.
Pulse Selects an input source for the pulse waveform, or turns
the waveform off.
Resp Selects an input source for the respiration waveform, or
turns the waveform off.
Rwave Output Lets you take the ECG R-wave signal from the ECG
output on the back of the system, and use the R-wave
signal as input to another device.