User`s guide

Physios
Controls
Revision D.0 5-3
ssn February 10, 1999 C:\WINNT\Profiles\dapowell\Desktop\D.0 Books\CD FILES SONOS
Controls
Primary
Beats
When Trigger ECG is active, adjusts the number of
beats between the triggered updates of a 2D, Color,
Angio, or Spectral Doppler image.
AutoBeat
Sequence
Defines the sequencing of R-wave acquisition of
images in Triggering mode.
Delay When Trigger ECG is active, updates the 2D, Color,
Angio, or spectral Doppler image at a specified number
of milliseconds after the R-wave.
ECG Enables gain and position adjustment of the ECG
waveform. In 2D, Color, and Angio, the waveform
appears below the image and cannot be repositioned.
Gain [Gain ECG, Gain Pulse, Gain Resp, or Gain
Hrtsound]
Adjusts the amplitude of the active waveform signal.
Hrtsound Enables adjustment of Hrtsound Gain and Position.
Activates the heart sound Filter control in Setup.
Interval When Trigger Timer is active, adjusts the 2D, Color,
Angio, or Spectral Doppler image update interval, in
milliseconds.
Invert Inverts the polarity of the ECG, Aux 1, Aux 2, and Resp
waveforms.
Monitoring Mode Turns on or off the low MI grayscale image in real time
on the right side of a side-by-side display during a
trigger beat acquire. Helps maintain the imaging plane
without disrupting the contrast agent. Values are On/
Off. Only available in BW and Angio modes using the
s3 transducer in TCE1 and TCE2. See Using Contrast
Imaging for more information.