User`s guide

Peripheral Devices
Using the Remote Service Feature
4-24 Revision D.0
Selecting Remote Service Mode
1. To access the Test Menu, press .
2. Use the trackball to select Remote Service Mode and press .
3. After a short delay, the system displays a message indicating it is ready to
accept a call from the local Philips Service Center.
Test
TESTRESET
SETUP
Enter
Run Basic Test
Run Extended Basic
Key PRocessor
Scan Converter
Scanner
Test Menu
Other Tests and Utilities
Test Setup
Run Time Error Log
System Information
Remote Service Mode
RST Error Log
To return to Imaging mode,
press
.
Test
The system is in Remote Service Mode
Exit Remote Service Mode
Status
Idle