User`s guide

Peripheral Devices
Using the Remote Service Feature
Revision D.0 4-23
ssn February 10, 1999 C:\WINNT\Profiles\dapowell\Desktop\D.0 Books\CD FILES SONOS
Connecting the Ultrasound System to a Modem
1. Disconnect all transducers and other external peripherals.
2. Connect the modem to the RS-232C 25-pin connector port located on the back
of the ultrasound system (J1).
3. Connect the modem to a fax line, or to a dedicated analog phone line.
4. Turn on the modem. The system is now ready for Remote Service mode.
Hi Level (1VPP)
Line Level
ECG Output
Auxiliary RS-232C port for
Connection to
Auxiliary super video output
Stereo Audio Out
remote control
foot switch control pad
RS170/CCIR composite output
TTL open collector closure
signal for remote printing
PAL/NTSC
composite video output
Aux outputs for display
Red, Green, Blue, Sync
Analog output
LAN
!
6AJL017
IEC symbol - Consult Documentation
Earth ground (symbol)
LAN connection for computer*
* Do not connect telephone to LAN connector.
For details on how
to use the modem,
refer to the
manufacturer’s
documentation.