User`s guide

Disk
Storing Images to Disk
Revision D.0 12-21
ssn February 10, 1999 C:\WINNT\Profiles\dapowell\Desktop\D.0 Books\CD FILES SONOS
Storing Images to Disk
You can store images to disk by touching one of the following controls:
• Disk Autostore—Available under the Loop control. Automatically stores a
loop or frame after you acquire and accept it. Images are stored under the
current patient ID. Disk Autostore allows both automatic and manual
displays.
• Disk Store—Available under the Loop control. Stores the currently selected
loop, frame, or analysis report to disk. Images are stored under the current
patient ID.
• Store All Loops—Available under the Disk control. Displays the Store All
Loops window, which gives you the option of storing all unstored loops to
the current study, storing all loops to a new study, or storing all bookmarked
loops to a new study.
NOTE If Store All Loops or Bookmarked Loops is selected, the patient ID
information is cleared after being stored with the current patient information. If
Unstored Loops is selected, the patient ID information remains.
Using these storage controls in conjunction with Auto Display on or Auto
Display off provides you with a variety of acquisition and storage options. The
following pages give you some examples of the most common scenarios. You
can choose the options that best fit the needs of your environment.
NOTE Always use End Study to close the current study and store all loops, frames, and
analysis reports to disk. End Study also clears memory and patient ID and
analysis information, so you are ready to start your next study.