User`s guide

Disk
Configuring Disk Storage
12-16 Revision D.0
5. Use the trackball to select the autodelete options and press . The
system defaults to No for both options, including Delete loop from
memory after successful store to disk? This means that loops that
have been stored on the disk are not deleted from loop (CLR) memory.
You may review and edit your studies on the ultrasound system. When
you choose Delete loop from disk when manually deleted from loop
memory?, the manually selected image is deleted from loop memory
and the optical or hard disk simultaneously. (Touching End Study
clears all loops from loop memory.)
Note: Delete options can be preconfigured depending on the selected
preset. Always check setup to be sure that the delete options are
adjusted appropriately before you begin loop acquisition.
Enter
Note: If you select Yes for
Delete loop from disk
when manually deleted
from loop memory?
and then touch Delete all
pages, the system deletes
only from loop memory.