User`s guide

Analysis
Analysis Troubleshooting
Revision D.0 10-17
ssn February 10, 1999 C:\WINNT\Profiles\dapowell\Desktop\D.0 Books\CD FILES SONOS
Analysis Troubleshooting
CAUTION On some systems, characters may appear blurred, particularly in frozen or paused
studies played back from a video recording.
To assure the best possible legibility, Philips recommends the following:
• When possible, review reports and measurements live, as they are produced.
Make prints at that time for later review.
• When viewing videotaped studies that contain unclear characters on paused
or frozen displays, unfreeze the tape and view the information in play mode.
For additional information, consult your Philips representative.
Symptoms Suggestions
Completed
calculation does
not display.
Make sure you have completed all measurements
displayed on the touch panel for this calculation.
Measurement or
calculation is
unavailable.
Touch the other groups displayed to see if the
measurement or calculation you want is there. If not,
press , highlight Edit under Meas/Calc, and page
through the choices until you find the one you want.
Touch it to add it to the touch panel, under the currently
active group.
Wrong report
appears.
Touch the report label that matches the report you want
to view.
Report control is
not on the touch
panel .
Either complete the active measurement, or turn it off by
touching it.
Report pages are
printed on the
wrong printer.
Press , touch Print, and adjust Report [printer]
to display the printer to use for report pages.
Setup
Setup