User`s guide

The System
System Power
1-6 Revision D.0
NOTE Turning the main power switch back on before the shutdown message is
displayed stops the shutdown procedure. The system and PC remain on.
NOTE After the shutdown message has displayed, the system ignores further changes to
the main power-switch setting, and shutdown completes. However, if you change
the power-switch setting after the shutdown message is displayed, the new
setting takes over after shutdown. For example, if you turn the main power
switch back on during the final stages of shutdown, both the system and PC
power up after shutdown completes.
3 After a short delay (typically less than 30 seconds), the PC shuts down.
4 A few seconds later, the SONOS system completes shutdown, but standby
power remains on.
CAUTION If you disconnect the power cord before system shutdown completes, the PC may
not shut down properly.
If you turn system power off before the PC boots up completely, the PC may not
shut down properly.
NOTE If the PC does not power up when the SONOS system powers up, turn the main
power switch off, wait for the system to power down completely, and then power
the system back up. If the PC still does not power up, turn the PC power on by
pressing the power button on the upper-left front corner of the PC.