User`s guide

Measurements
One-Point Depth Measurement
9-20 Revision D.0
Making a One-point Depth Measurement
To make a one-point depth measurement press . The caliper is displayed
on the imaging screen, and the depth measurement in a results box.
Making Angle Measurements in the OB Preset
To make an angle measurement in the OB preset:
1. Touch OB/GYN Exam on the left touch panel.
2. Touch OB preset.
3. Touch Analysis.
4. Touch Limbs.
5. Touch Angle.
6. Touch Baseline.
7. Use the trackball to position the free crosshair that appears, and then press
to anchor the crosshair and get a second free crosshair.
8. Use the trackball to move the second crosshair to create and position a line.
Press to confirm.
Caliper
DEPTH 3.00 CM
A +
Caliper
Enter