User`s guide

Measurements
Online Measurements
9-12 Revision D.0
2D/BMode Trace Measurements
If you stop moving the caliper before finishing the trace, the system closes the
trace from the caliper’s position to the first dot, and the measurement values are
automatically displayed. If you complete the trace manually, the new values also
display.
deletes individual trace points during an active trace, or all measurement
text and graphics for completed measurements.
A X
AREA 23.6 CM2
CIRC 19.4 CM
1. Press , and
press .
Freeze
Trace
2. Position the
starting point with
trackball, and press
.
Trace
3. Trace the area to
measure with the
trackball, and press
.
4. To perform
additional
measurements (up to
four per screen),
press
and
repeat steps 2 and 3.
Enter
Trace
Erase