User`s guide

Imaging Modalities
2D/BMode Imaging
7-46 Revision D.0
Image has too much
contrast or is grainy.
Postproc to decrease grayscale contrast.
Compress to increase low-level echoes.
Frequency Fusion. Increase transmit power by
moving the transmit carat downward, if Adaptive
Power is on or if using the control on the secondary
touch panel. Otherwise, change to a higher frequency
transducer.
For slow-moving blood or structures, touch Secondary
Controls and Persist to soften the image.
Adjust monitor settings.
Use soft echo enhancement to emphasize certain
pathologic or physiologic conditions.
Not enough
penetration.
Gain.
Frequency Fusion. Increase transmit power by
moving the transmit carat downward (if on) on or using
the control on the secondary touch panel. Otherwise,
change to a lower frequency transducer.
Power.
Grayscale images
are printed on the
wrong printer.
Press , touch Print, and adjust B/W [printer] to
display the printer to use for grayscale images.
Setup