Quick Start Guide

REMOVING THE TRIPOD MOUNT
For some applications such as gimbal or drone mounting, you might want to remove the
attached tripod mounting plate. The Allen keys required are supplied with your camera.
Quick Steps (video below):
Remove the three screws holding on the lens mounting ring
Remove the two large screws at the bottom of the camera
Detach the tripod mounting plate
Replace the lens mounting ring
TROUBLESHOOTING & KNOWN ISSUES:
Error Code E:61:00: Enabling your camera to accept a wide array of lens choices
requires that we remove the original SONY lens assembly. As a result, the auto-focus drive
can no longer determine that lenses’ position, resulting in the error code. This has no effect
on the performance of the camera and the error code will not appear in any footage.
Camera Freezes When Using Mobile App: If you find that the camera hangs or freezes
when trying to capture via the Sony Playmobile app, simply change your focus method to
‘PF’ instead of ‘MF’.
My footage looks pink! You need to re-install the supplied IR-Cut filter which prevents
infra-red light from reaching the sensor. Spare filters can be found here.
Dark spots in footage, especially when iris is closed down: Your image sensor or filter
needs to be cleaned and/or you need to ensure that there is no dust or debris on the back of
the lens. Using an air puffer is usually enough to blow away small particles that may have
gotten on the sensor or lens. A LensPen MiniPro is also a great tool for cleaning – see
notes above about cleaning.