Datasheet

90
bachmann.com
\
FACILITY SYSTEMS
Custom module with 4-key keypad for EnOcean application Black
917.093
∙ Front: 4 buttons, white, blue illuminated, with various pictograms for labelling
programmable on EnOcean applications; with built-in radio module, battery buffered;
∙ Requires approx. 35 mm installation depth
Custom module with stainless steel button Black
917.046 ∙ Front: Stainless steel button; switching capacity: 50 mA/24 V/DC;
∙ Rear: 2-pole screw terminal
∙ Requires approx. 30 mm installation depth
Custom module with stainless steel button, blue illuminated Black
917.047
∙ Front: Stainless steel button, blue illuminated (ring illuminated);
switching capacity: 50 mA/24 V/DC
∙ Rear: 4-pole solder pins
∙ Requires approx. 30 mm installation depth
Custom module with automatic switchoff button Black
917.060 ∙ Front: Button, black;
∙ Rear: GST15i2 connector with approx. 1.0 m cable (suitable for power strips with
automatic switchoff device, e.g. STEP switchoff device 906.005
∙ Requires approx. 40 mm installation depth
Custom module with button Black
917.152 ∙ Front: On/Off switch
∙ Rear: Approx. 1.0 m 3G 1.0 mm² cable with end sleeves (labelled)
∙ Requires approx. 60 mm installation depth
Custom module with switch (to control external devices) Black
917.135 ∙ Front: 2-pole rocker switch, green
∙ Rear: Approx. 1.0 m H05VV-F 4G 1.50 mm² cable with end sleeves (labelled)
∙ Requires approx. 60 mm installation depth
Control See the glossary for detailed information on use/application
Custom module with 4-key keypad for MediaNet control unit Black
917.127 ∙ Front: 4 buttons, white, blue illuminated
∙ Rear: 2 x RJ45 sockets for connecting to media controller and linking to further modules
of the same type
∙ Requires approx. 30 mm installation depth
∙ Note: cannot be used in electrical installations.
Custom module with 4-key keypad for KNX application Black
917.056
∙ Front: 4 buttons, white, blue illuminated, with various pictograms for labelling
programmable on KNX installations; with integrated bus coupler;
supply voltage: System voltage 30 V DC via bus push-in terminal;
∙ Rear: Bus push-in terminal, 2-pole
∙ Requires approx. 35 mm installation depth
FACILITY SYSTEMS IT RACK PANEL ELECTRICAL INSTALLATIONS
Art. no. Version
Front Rear
CUSTOM MODULES / Control