Datasheet

61
bachmann.com
\
STEP accessories
Art. no. Version
Fitting accessories
375.502 ∙ Contents:
- 4 screws 2.9 x 30 mm
- 2 end cap cover strips to provide a visual finish (fitted on the end caps where two strips
are linked together)
- 1 end cap for power outlet socket
Stainless steel mounting bracket
940.096 ∙ For insertion into the rear of a STEP profile
∙ Ideal for use with power strips with data connections
∙ 2 items
Stainless steel mounting bracket with elongated hole
940.024 ∙ For insertion into the rear of a STEP profile
∙ With elongated hole (keyhole) for screwing into place, ideal for use with power strips with data
connections
∙ 1 item left, 1 item right
Stainless steel mounting plate, flat
940.097 ∙ For insertion into the rear of a STEP profile
∙ For screwing in place e.g. under a desk or table
∙ 2 items, packed in plastic bag
STEP cover plates
375.529 ∙ For fitting over the end caps of STEP power strips
∙ For visual finish
∙ Plastic, black
∙ 2 items, packed in plastic bag
Sheet steel mounting plate
940.108 ∙ For insertion into rear of STEP profile
∙ Tightening the nut on the threaded screw fixes the
power strip in place
∙ Contents:
- 1 mounting plate incl. M5 screw, washer and nut
STEP plastic mounting clip
918.025
∙ For mounting STEP BASE and STEP ALU power strips in suitable cut-outs in sheet steel
(2.0 mm thickness)
∙ Contents: 2 plastic mounting clips, 4 screws 2.9 x 30 mm
∙ Drawings for the required cut-outs can be requested if required.
For earthed power supply cable to STEP unit, see Accessories section
•Pre-assembledpowersupplycableswithintegratedearthconnection
•Earthingofthepowerstripisindependentoftheinstallation
•IdealincombinationwithSTEPpowerstrips(startingonpage56)
STEP / Accessories
Connection Panels