Datasheet

112
bachmann.com
\
FACILITY SYSTEMS
Facility control modules
Pushbutton modules in the Bachmann custom-module format offer convenient control of light and blinds
in open-plan and individual offices and in meeting and conference rooms.
The control module is installed within the user's easy reach on the desk connection panel at office work-
stations or in meeting rooms. Then the lighting and blinds settings can be controlled with ease from the
user's seat. The increased convenience lets the user respond to changing environmental situations - and
thus save energy.
KNX pushbutton module 4-way
The 4-way KNX pushbutton module is designed as a custom module and can be integrated into Bach-
mann Facility systems either by the manufacturer or retrospectively. Installation in rack and electrical
installations is also possible with the custom module system.
Functions such as switching, dimming, storage of lighting scenes, blind control etc. can be programmed
by specialist personnel using the standard ETS software. For this, specialist knowledge and in-depth
KNX training is required.
Each button can be custom configured and labelled accordingly (common pictograms are supplied).
Theblue illumination indicates the activity status.
This pushbutton module can be simply installed by KNX-trained personnel. The appropriate bus coupling
is built into the module and can be simply connected to the bus cable by means of clips.
KNX / EIB 4-button custom module
Front:
∙ 4 x buttons, square, self-labelling, blue
backlit, programmable on EIB/KNX instal-
lations
∙ With integral bus coupler and bus terminal
(can be labelled with physical address)
∙ Supply voltage: System voltage 30 V DC via
bus terminal
∙ Use: e.g. as buttons for controlling lighting,
blinds etc.
Art. no. Version
Micro clamp terminals
917.056 Rear:
∙ BUS plug-in terminals
∙ Requires approx. 35 mm
installation depth
FACILITY SYSTEMS IT RACK PANEL ELECTRICAL INSTALLATIONS
MEDIA TECHNOLOGY / Custom Modules / KNX