Datasheet
99
IT POWER SOLUTIONS
9
Integration of devices installed in series
RCD (residual current protection device) RCM (residual current monitor)
RCD is the abbreviation for Residual Current Protective Device.
If an insulation error causes a dangerous contact voltage, RCDs
have the job of interrupting all the poles on operating equipment
within 0.2 or 0.4s.
RCM is the abbreviation for Residual Current Monitor.
The use of an RCM allows drops in the level of insulation (creepage /
leakage currents) of a power supply to be detected during operation
before a high residual current causes protective devices to trip.
∙ Customised solutions in series quality possible
∙ Integration of up to 2 HP (36mm) wide devices installed in series
∙ Selective, extremely compact fusing in the rack possible
∙ Use of RCD systems (residual current circuit breakers) possible
∙ Use of RCM systems (residual current monitoring) possible
∙ Integration of pulsed current meter possible
The benefi ts at a glance
IT