Owner's Manual

Tru Pointe® Ultra Instruction 0028-9000

4 Operation

Physical

To begin using the Tru Pointe

Ultra HD, ﬁ rst take a moment to become familiar with the unit’s

controls in Figure 1 and 2.

Figure 1.

Figure 2.

Taking Readings

General

1. Put on the Headphones and plug them into the Headphone Jack on the right side

of the detector.

2. Slide the Sensitivity Adjust toward the top of the instrument until it stops. The Tru

Pointe

Ultra HD is now at full sensitivity.

NOTE: Always begin testing at full sensitivity and adjust

as needed to reduce background noise.

3. Gently push and hold the On/Off Button to begin leak detection. Simultaneously

adjust the sensitivity level to pinpoint the location of the leak.

NOTE: The On/Off Button must be pressed to continue

leak detection. Once the On/Off Button is released, the

detector will shut off.